Swing table type shot blasting machine

Operating Principles

Swing table type machine is having circular table which is having constant speed. This machine is equipped with a high performance blast wheel. Components to be load on table and start blasting operation after closing the door. The abrasives are thrown upon the work pieces and make work pieces clean.

TECHNICAL SPECIFICATION

S. No. Description SWING TABLE-30” SWING TABLE-36” SWING TABLE-48”
1. Diameter Of Swing Table (mm) 750 mm 900 mm 1200 mm
Overall dimension 1.2x1.2x1.5 Mtr. Approx 1.5x1.5x1.8 Mtr Approx 1.8x1.8x2 Mtr Approx
No. Of Swing Table 1 1 1
Max. Load On Swing Table 350 Kg. 450 Kg. 750 Kg.
RPM Of Swing Table 6 6 6
HP Of Swing Table Motor 1 1 1
Max. Job Height (mm) 600 800 600
2. Turbines Bi Direction belt driven Bi Direction belt driven Bi Direction belt driven
No. of Blast Wheel 1 1 1
No. of Blades 8 8 8
Size of Blast Wheel (inches) 12” X 2 ½ 12” X 2 ½ 15” X 2 ½
H.P. of Blast Wheel 7.5 7.5 10
R.P.M. of Blast Wheel 2800 2800 2250
3. Abrasive Flow    
Approx. Shots flow rate 8000/Wheel/Hour 9000/Wheel/Hour 9000/Wheel/Hour
Shot Velocity 70-75 Mtrs./Sec. 70-75 Mtrs./Sec. 70-75 Mtrs./Sec.
Shot Consumption 0.15 Kg/Wheel/Hour/HP 0.15 Kg/Wheel/Hour/HP 0.15 Kg/Wheel/Hour/HP
Initial Charge of Shots 500 Kg. 500 Kg. 500 Kg.
4. Recovery System    
Drive For Bucket Elevator(HP) 1 1 2
5. Filter Systems    
Type of Dust Collector Fabric Bag Fabric Bag Fabric Bag
Fan (HP) 2 2 5
CFM of Dust Collector 1300 1300 2200
Bag Cleaning 1 HP Shaker Motor 36 36
Machine Dimensions Refer Drg. 1 HP Shaker Motor 1 HP Shaker Motor
6. TOTAL POWER REQUIRED 14 HP approx. 13.5 HP Approx. 24 HP